Product Categories
(Total 9 Products for Oil Filter Replacement)
Hydraulic Inline Cast Version Filter 850
The SDRFL 851 Cast Version Inline hydraulic filter is designed according to international regulations. It consists of a two piece filter housing with a bolt-on cover plate. Inlet and outlet positioned at the same side or opposite side. Filter elements are validated according to ISO test standard, with the following...
Change-over Return Line Filter Element 0060
The pleated filter layer has an outside wrap which protects the filter layer and distributes the incoming fluid flows through the filter layer evenly. The interior of the wrap is composed of support layers and filtration layers. The filtration layer is composed of multi-layer filter papers. Each of filtration layer...
Change-over Return Line Filter Element 0095
Each filter element has an external or internal wrap. The interior of the wrap is composed of support layer and filter layer. The filtration layer is composed of multi-layer filter papers. Each of filtration layer has different filtration raiting. Also the outside wrap can protect the filter layer away from mechanical...
Return Line Filter Element 0060
Metal mesh filter has the advantage of higher strength and higher pressure than glass fiber filter. Also, the conventional filtration accuracy can also reach 20 microns. The W/HC stainless steel wire mesh element is widely used in pressure and return line filters. Test standard...
Metal Fibre Return Line Filter Element
The filter element consists of stainless steel fibre. This stainless steel fibre is pleated, and produces a low pressure drop and is suitable for all fluid. Metal fibre filter element is widely used in highly dynamic applications. In order to reduce the dimension of the filter element and increase the filtration area,...
Compressor Oil-Gas Separator For OZEN
PN: SD01460620 Flow m³/min/0.7MPa: 46 Flange Diameter: 434 Height: 620 Depending on different applications, the gas oil separator is constituted of different layers. The first layer is a coalesced layer which is made of fiberglass. Multi-layer sub-micron fiberglass ensures efficient capture of small oil droplets at...
Hydraulic Change-Over Return Line Filter 0110
SDRFD 110 filter consists of one-piece housings with a bolt-on cover plates. The two housings are connected by a ball change-over valve. There are clogging indicators on both sides. Symbol for hydraulic systems Filter Element Filter elements are available with the following pressure stability values: BN/HC: 25 bar...
Hydraulic Fiberglass Inline Filter Element
The hydraulic filter element is used in the hydraulic system to filter out particulate debris and rubber impurities to ensure the cleanliness of the hydraulic system. In order to reduce the dimensions of the filter element and increase the filtration area, the filter layer is generally folded into a corrugated shape,...
Hydraulic Fiberglass Manifold Mounted Filter Element
The filter element is for high pressure section, medium pressure section, oil return section and oil suction section. In order to reduce the dimensions of the filter element and increase the filtration area, the filter layer is generally folded into a corrugated shape, and the layer is generally pleated below 20 mm....
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.